The Ira Vertical Rail Planter: Wall Mounted System by Lofted Goods

The Ira Rail Planter by Lofted Goods is designed to mount vertically on your wall.

The planters are available in two sizes (4" and 3") and feature a hidden, twist-off drip tray.

The system is designed to be used with a 1" (or 25mm) dowel
(sold separately - Can be purchased here - https://amzn.to/43CHpzJ)

- There is an option with a plastic dowel that prints in four parts and threads together for a total length of 36".

- We also offer a 36" Printed Dowel and Wall Mounting Kit (pictured without planters) This option is sold WITHOUT planters.

- The Complete System comes with (3) Large Planters and (1) Small Planter as well as the wall mounting kit. This kit is available with or without the 36" Printed Rod.

Designed by Lofted Goods Co.

How to mount to the Rail System your wall:

1. Slide dovetail attachments onto dowel
2. Insert wedge into attachments from the bottom. Use a flat head screwdriver to push the wedge all the way in and secure the attachment to the rail
3. Place top and bottom wall mounts on the ends of the rail
4. Insert the keyhole markers into the keyhole slots on the top and bottom wall mounts
5. Firmly press against wall in desired location and the keyhole markers will make an indent where you need to drill
6. Drill holes using a 3/16" drill bit
7. Insert wall anchors and screws (#8 - #10 x 1" screws and anchors)
8. Make sure the screw head is sticking out just far enough to tightly fit in the keyholes. Use the included depth gauge to determine the distance the screw head should be sticking out.
9. Attach rail to the wall
10. Slide planters on to attachments